PRODUCT INFORMATION

Recommended Amplifier Power	20 to 300 W
Drivers	1 x 1″ / 2.5 cm Tweeter 2 x 6.5″ / 16.5 cm Midrange 2 x 8″ / 20.3 cm Woofer
Ports	1 x 3.5″ / 8.9 cm, Rear-Firing
Frequency Response	28 Hz to 32 kHz
Impedance	8 Ohms
Crossover	High-Pass: 2 kHz Low-Pass: 700 Hz (Woofer 1), 160 Hz (Woofer 2)
Sensitivity	88 dB
Dimensions	13.8 x 45.6 x 16.5″ / 35.1 x 115.8 x 41.9 cm (without Grille) 13.8 x 45.6 x 16.8″ / 35.1 x 115.8 x 42.7 cm (with Grille)
Weight	75.4 lb / 34.2 kg

1” Aluminum Dome Tweeter

FEA-optimized diffuser for airy and unveiled presentation
Aluminum dome delivers exceptional transient response and exceptional stiffness/mass ratio

6.5” Midrange Drivers

Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior beyond pass band
Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
Cast aluminum basket to ensure precise alignment of critical components and additional heat-sinking capacity
Vented voice coil former to minimize air compression artifacts at high drive levels

8” Woofers

Aluminum shorting rings to reduce gap inductance and lower distortion
Long stroke motor and suspension for high output
Vented voice coil formers to minimize air compression artifacts at high drive levels

Crossover

3.5-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
Unique tapered midrange array miniimizes off-axis lobing and enhances radiated sound power into listening space
Top midrange-to-tweeter crossover: 2 kHz
Bottom midrange taper frequency: 700 Hz
Dual midrange-to-woofer crossover: 160 Hz

Cabinet

Separate sealed midrange enclosures minimize top-to-bottom wall dimensions and shift standing waves beyond the driver pass band, minimizing negative driver interaction and associated frequency response degradation
Non-parallel cabinet panels reduces axial standing waves within the cabinet, reducing frequency response coloration
Acoustically transparent and FEA optimized grilles, wedge-shaped front baffle and flush-mounted drivers all contribute to reduced edge diffraction and improved on-axis high frequency response
FEA-optimized bracing, 1″ thick midrange/tweeter baffles and 1.5″ thick woofer baffles eliminates structural resonances and ensures the cabinet remains acoustically inert for uncolored response even at the highest drive levels

Reviews

There are no reviews yet.

Be the first to review “ULTRA TOWER (PAIR)”